Used EIKI LC-XT3 10K Lumen Digital Projector - Serial Number G35A1368
EIKI factory refurbished LC-XT3 projector Serial Number G35A1368. Work performed includes:
- Thorough cleaning of unit before any repairs
- Cleaned unit and replaced lamps, foam bottom filter and rear foot assembly
- Adjusted all settings and optics
- Tested all inputs and RS232 for 2 hours. tested ok
- Total projector hours 3,160
- Includes ATA case
- LC-XT3 XGA Theater Projector
4-lamp 3-panel LCD projector puts 10,000 ANSI Lumens bright images on screens up to 40' wide, at 1024 x 768 pixel resolution.
The EIKI LC-XT3 XGA THEATER PROJECTOR delivers an impressive 10,000 ANSI Lumens brightness from a 2-man transportable that runs on 15 amp "household" current. The LC-XT3's high brightness results from the use of a 4 x 250 Watt UHP lamp system, which provides stable illumination and color temperature over the life of the lamps. The result is illumination uniformity of 90%, and an impressive 1100:1 contrast ratio.
The LC-XT3 incorporates professional features, including 5-BNC and DVI-I data inputs, compatibility with all HD video standards, digital video noise reduction, and enhanced progressive scan circuitry with compatibility up to 1080i with 2-3 pulldown support.
Inputs are modular, for rapid reconfiguration. In addition to the standard data and video input modules, an Upconverter video module, HD-SDI and SD-SDI decoders, and a PjNET network interface are available.
Offered without lens, the LC-XT3 projects images up to 40' wide, and accepts a range of zoom and fixed focus lenses, both manual and powered, ranging from 0.8:1 to 9.5:1, and easily installed with the Quick Change Lens Installation System.
With a dot clock of 230 MHz, the LC-XT3 is compatible with most workstations. Its native resolution is 1024 x 768, for true XGA display. And smart data compression and expansion provides compatibility with inputs from UXGA down to VGA. Power lens shift minimizes the need to tilt the projector, and permits offset ratios as high as 10:0~0:10, while digital keystone correction up to +/- 40 degrees eliminates distortion. Wireless/wired remote control, and local and RS-232 control are standard.
The LC-XT3 is compatible with NTSC, PAL, SECAM, NTSC 4.43, PAL-M and PAL-N color video systems. It accepts composite, S-Video, and Component video input, and displays both 4:3 and 16:9 aspect ratios with advanced video scaling.